|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Ordering number : ENN7088 TF218 N-channel Silicon Junction FET TF218 Capacitor Microphone Applications Features * Package Dimensions unit : mm 2201 [TF218] 1.4 * 0.2 * * 3 1.2 0.8 0.2 2 0.45 0.07 1 0.07 * Ultrasmall package facilitates miniaturization in end products. Especially suited for use in audio, telephone capacitor microphones. Excellent voltage characteristic. Excellent transient characteristic. Adoption of FBET process. 0.25 0.2 (Bottom view) 0.1 3 0.46 Specifications Absolute Maximum Ratings at Ta=25C Parameter Gate-to-Drain Voltage Gate Current Drain Current Allowable Power Dissipation Junction Temperature Storage Temperature Symbol VGDO IG ID PD Tj Tstg Conditions 1 : Drain 2 : Source 3 : Gate 1 2 (Top view) SANYO : VSFP Unit --20 10 1 100 150 --55 to +150 V mA mA mW C C Ratings Electrical Characteristics at Ta=25C Parameter Gate-to-Drain Breakdown Voltage Cutoff Voltage Zero-Gate Voltage Drain Current Forward Transfer Admittance Input Capacitance Reverse Transfer Capacitance Symbol V(BR)GDO VGS(off) IDSS yfs Ciss Crss IG=--100A VDS=5V, ID=1A VDS=5V, VGS=0 VDS=5V, VGS=0, f=1kHz VDS=5V, VGS=0, f=1MHz VDS=5V, VGS=0, f=1MHz Conditions Ratings min --20 -0.2 140* 0.5 1.0 3.5 0.65 --0.6 --1.0 350* typ max Unit V V A mS pF pF Continued on next page. * : The TF218 is classified by IDSS as follows : (unit : A) Marking IDSS A4 140 to 240 A5 210 to 350 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN N3001 TS IM TA-3366 No.7088-1/4 TF218 Continued from preceding page. Parameter Symbol Conditions Ratings min typ --3.0 --1.2 25 1000 1.2 --110 --3.5 --1.0 max Unit [Ta=25C, VCC=4.5V, RL=1k, Cin=15pF, See specified Test Circuit.] Voltage Gain Reduced Voltage Characteristic Frequency Characteristic Input Impedance Output Impedance Total Harmonic Distortion Output Noise Voltage GV GVV Gvf ZIN ZO THD VNO VIN=10mV, f=1kHz VIN=10mV, f=1kHz, VCC=4.51.5V f=1kHz to 110Hz f=1kHz f=1kHz VIN=30mV, f=1kHz VIN=0, A curve dB dB dB M % dB Test Circuit Voltage gain Frequency Characteristic Distortion Reduced Voltage Characteristic 1k VCC=4.5V VCC=1.5V 15pF 33F + VTVM V OSC THD BA 1k Output Impedance 500 450 400 ID -- VDS 500 450 400 ID -- VDS Drain Current, ID -- A 350 300 250 200 150 100 50 0 0 1 2 3 4 5 6 Drain Current, ID -- A 350 300 250 200 VGS=0 VGS=0 --0.1V --0.1V 150 100 50 0 0 1 2 3 --0.2V --0.3V --0.4V 7 8 --0.2V --0.3V --0.4V 4 --0.5V 9 10 IT02310 --0.5V 5 IT03015 Drain-to-Source Voltage, VDS -- V 500 450 400 ID -- VGS Drain-to-Source Voltage, VDS -- V 400 360 320 ID -- VGS VDS=5V VDS=5V Drain Current, ID -- A 350 300 250 200 150 100 50 0 --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 Drain Current, ID -- A 280 240 200 160 120 80 40 0 --1.0 --0.9 --0.8 --0.7 --0.6 --0.5 --0.4 --0.3 --2 5 --0.2 --0.1 15 0 C A Ta =7 5 25 C ID = SS A 0 25 0 35 C A --0 Gate-to-Source Voltage, VGS -- V IT02312 Gate-to-Source Voltage, VGS -- V IT02313 No.7088-2/4 TF218 1.3 yfs -- IDSS VDS=5V VGS=0 f=1kHz 700 650 VGS(off) -- IDSS VDS=5V ID=1A Forward Transfer Admittance, yfs -- mS 1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0 Cutoff Voltage, VGS(off) -- V 200 300 400 500 IT02314 600 550 500 450 400 350 300 100 Drain Current, IDSS -- A 0 100 100 THD -- VIN Drain Current, IDSS -- A 200 300 400 500 IT02315 120 PD -- Ta Allowable Power Dissipation, PD -- mW Total Harmonic Distortion, THD -- % THD : VCC=4.5V f=1kHz IDSS : VDS=5.0V 10 100 150A I DSS= 350A 250A 80 60 1.0 40 20 0.1 0 50 100 150 200 IT02316 0 0 20 40 60 80 100 120 140 160 Input Voltage, VIN -- mV 2 Ambient Temperature, Ta -- C 5 IT02317 Ciss -- VDS Reverse Transfer Capacitance, Crss -- pF Crss -- VDS VGS=0 f=1MHz VGS=0 f=1MHz Input Capacitance, Ciss -- pF 10 7 5 3 2 1.0 7 5 3 2 3 2 1.0 7 1.0 2 3 5 7 10 2 3 0.1 7 1.0 2 3 5 7 10 2 3 Drain-to-Source Voltage, VDS -- V 0 ITR02641 GV -- IDSS Drain-to-Source Voltage, VDS -- V Reduced Voltage Characteristics, GVV -- dB --0.5 GVV -- IDSS ITR02642 --1 Voltage Gain, GV -- dB --2 GV : VCC=4.5V VIN=10mV RL=1.0k f=1kHz IDSS : VDS=5.0V --0.7 GVV : VCC=4.5V1.5V VIN=10mV f=1kHz IDSS : VDS=5.0V --0.9 --3 --1.1 --4 --1.3 --5 --6 --7 0 100 --1.5 --1.7 0 100 Drain Current, IDSS -- A 200 300 400 500 IT02320 Drain Current, IDSS -- A 200 300 400 500 IT02321 No.7088-3/4 TF218 2.5 THD -- IDSS THD : VCC=4.5V VIN=30mV f=1MHz IDSS : VDS=5.0V 32 ZIN -- IDSS Zi : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V Total Harmonic Distortion, THD -- % Input Impedance, ZIN -- M 2.0 31 30 1.5 29 1.0 28 0.5 27 0 0 100 26 Drain Current, IDSS -- A 200 300 400 500 IT02322 --111 0 100 960 ZO -- IDSS Drain Current, IDSS -- A 200 300 400 500 IT02323 VNO -- IDSS 950 Output Noise Voltage, VNO -- dB Output Impedance, ZO -- ZO : VCC=4.5V VIN=10mV f=1kHz IDSS : VDS=5.0V --112 --113 --114 --115 --116 --117 --118 --119 VNO : VCC=4.5V VIN=0, ACurve RL=1.0k IDSS : VDS=5.0V 940 930 920 910 900 0 100 --120 Drain Current, IDSS -- A 200 300 400 500 IT02324 0 100 Drain Current, IDSS -- A 200 300 400 500 IT02325 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of Nobember, 2001. Specifications and information herein are subject to change without notice. PS No.7088-4/4 |
Price & Availability of TF218 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |